Food Packaging Film, Plastic Film Testing Equipment

Write to to contact manufacturers of plastic testing equipments and machinery for testing of plastic products. Source MFI tester, tensile testing machines, UTM, universal tensile and compression testing machines, abrasion resistance, tear resistance, coefficient of friction tester for testing of plastics. Manufacturers of test machines, equipment for testing plastic pipes and plastic films, leakage, optical, mechanical and electrical properties of plastics products. In the packaging industry, Peel Strength Testing measures the strength of seals within flexible barrier materials. This measurement can then be used to determine consistency within the seal, in addition to the evaluation of the opening force of the package system. Seal strength is a quantitative measure for use in process validation, process control and capability. Seal strength is not only relevant to opening force and package integrity, but to measuring the packaging processes’ ability to produce consistent seals. Considering the demand for packaging testing equipment, North America and Europe region are expected to hold significant market share in global packaging testing equipment market. The increasing focus of enterprises across industry verticals such as food and beverages and pharmaceuticals on improving the packaging quality is driving the market growth in these regions.

Pharmaceutical packaging is the means of providing protection, presentation, identification, information and convenience to encourage compliance with a course of therapy. The commonly used packaging materials are Container, Closure, Carton or Outer and Box. There are various tests for determination of quality, integrity and compatibility of packaging materials. The specification and requirement of quality testing depends on type of pharmaceutical materials used. Containers are tested by many methods of which commonly used test for glass are Crushed glass test, Whole-Container test, Chemical resistance of test, Water Attack Test etc. Closure materials are tested by Transparency test Penetrability Fragmentation test Self seal ability test, Extractive test etc. The requirement of packaging material testing is set according to specification of regulatory agencies like WHO GMP, USFDA and ICH guidelines. Paper products are used in many different industries such as packaging industries, printing industries.

glass wall thickness

These machines can combine the application of tensile and compression forces, in addition to flexion and adhesion. This ratio is calculated again both under tensile forces and under compression forces and takes into account the compression changes experienced along an axis when a material is expanded from the opposite axis. The elastic modulus, or how much a material can deform when subjected to tensile forces. In other words, it calculates the resistance of a material to a non-permanent deformation. “Failing” in a material testing environment means a change in material from the point in which it still behaves as an elastic to a point in which it behaves like a plastic . Plastic films are often used to encapsulate, preserve and protect products destined for consumers or industry.

This makes it possible to have a mostly operator-free operation, which in turn reduces the possibility of human error and costs while improving the efficiency of the process. This concept can be applied in different ways and is also included in the material compression test. Measuring tensile forces is one of the key aspects of the ASTM D638 standard, but it is also important in metal testing. A pendulum tester measures the impact resistance of samples in various standard test configurations. Friction testing is used in the packaging industry to measures the slip resistance of a product, with the aim of predicting feeding and running speed on an automatic gluing, erecting, filling or packaging line. As part of its sustainability commitment,rose plasticnow offers a range of packaging solutions manufactured from sugar cane and PCR (Post-Consumer Recycled).

The assessment tests plastic packaging or film plastic for recyclability, the risk of product contamination in the packaging after use and the risk of contamination for nonrecyclable “look-a-like” plastic packaging. To help manufacturers ensure plastic packaging is recycled, Virginia-based Trex Co., which makes wood-alternative decking and railing from recycled plastic, is offering free recyclability testing to packaging manufacturers and brand owners. If the packaging passes the test, the companies’ packaging may qualify for the NexTrex recycling program. These documents provide a comprehensive recycling test and test result evaluation criteria for recycling a complete package innovation back into a finished article, instead of a molded plaque as in Critical Guidance. Applications Guidance for HDPE calls for innovations to be recycled back into new HDPE bottles. For PET, Applications Guidance provides for recycling an innovation back into new bottles, sheet, fibers, or strapping. The purpose is to test specific shelf-ready packages for technical compatibility with recycling, including all components of the package. Heat Seal Tester seals the specimen to determine the seal parameters of basic film, laminated films, coating paper and other heat sealing laminated films according to the requirement of relative standards.

Tyvek® has been known to provide superior microbial barrier under the most rigorous, highly contaminated conditions. Tyvek® is made of continuous, randomly oriented high-density polyethylene filaments. This unique structure gives Tyvek® greater resistance to microbial penetration than other packaging materials. Yes, in our packaging material testing lab, food-grade testing is conducted on the packaging materials that come directly in contact with the food item. This ensures that no toxicity transfers from the material to the food, and the item remains safe for consumption until it gets delivered. We have highly qualified team of professionals which is passionate about achieving the perfection in manufacturing of the machine.

Completion of design and development of packaging seems like the end of the significant tasks. At CMTL our success is built upon our understanding of the specifications and requirements of major industries. We have expertise in many industrial and fabrication processes and procedures and are able to interpret the associated testing program requirements. The Standards Council of Canada certifies CMTL as an independant testing laboratory to ISO 17025. Accurate simulation of the short-wave ultraviolet portion of sunlight and outdoor moisture have made the QUV accelerated weathering tester the world’s most widely used weathering tester for plastics. Because of its simulation of the entire sunlight spectrum and versatile, easy-to-use specimen tray, the Q-SUN xenon test chamber is another popular choice, particularly when color stability is an important concern.

For packages and containers, the outside of the sample is high-purity nitrogen and the inside is high-purity oxygen. Puncture resistance is a measure of the maximum force or energy required to penetrate a material. This type of biaxial stress is seen by packaging films when packing hard protuberances such as pelleted dry foods and frozen vegetables. And will see how it can help manufacturer of plastic films to assure a high quality packaging. Labtiger is a main maker and provider of MFI Tester, soften stream obstruction Tester, Polymer testing machine, plastic granules testing instruments and so on everywhere throughout the world with the end goal of stream rate testing. The testing gear meets ISO and ASTM benchmarks with the principle center around meeting the main conditions of load and temperature. ASTM’s plastics standards are instrumental in specifying, testing, and assessing the physical, mechanical, and chemical properties of a wide variety of materials and products that are made of plastic and its polymeric derivatives. During processing, these synthetic or semisynthetic organic solids have a very malleable characteristic that allows them to be molded into an assortment of shapes, making them very suitable for the manufacture of various industrial products.

The regulations for child-resistant packaging require a test protocol that involves children. Samples of the test packages are given to a prescribed population of children. With specified 50-child panels, a high percentage must be unable to open a test package within 5 minutes.Adults are also tested for their ability to open a child-resistant package. Researchers are not restricted to the use of published standards but can modify existing test methods or develop procedures specific to their particular needs. If a test is conducted with a deviation from a published test method or if a new method is employed, the test report must fully disclose the procedure. A review of technical literature and patents provides good options to consider for test procedures. In circulated air through beverages filling line, the containers are loaded up with extraordinary weight which here and there may prompt the blasting of the container. High weight is required amid filling to keep the freshness flawless, yet this may prompt blasting of containers now and again. In this manner, it is important to decide the blasting quality of PET containers with the assistance of Bottle Burst Tester. Ultra-low deep freezers are supplies that are utilized to store and save products for a more extended timeframe i.e. basic for mechanical purposes and in addition for domestic tasks.

Sustainability Program Helping you find the sustainable packaging products that work best for your products. Making better decisions using the obtained information in regard to the design of the package and the distribution process. This is an important step in which the operator must ensure that the sample is not tilted to either side in order to obtain accurate results. Once this test has been performed and the exact dimensions of the samples to be tested have been determined, the ASTM D638 method outlines 5 sample types. The ASTM D638 method is applied to rigid plastic samples with sizes ranging from 1.00 mm to 14 mm thick. Simply complete the form below and the BPF will send your enquiry on to relevant companies who can supply the material you are looking for. Thermal testing consists of either measuring the HDT or VICAT softening point. PerkinElmer uses cookies to ensure that we give you the best experience possible on our website. If you continue without changing your settings, we will assume that you consent to receive cookies from this website. To learn more, please review our cookie policy, which includes information on how to manage your cookies.

As film tension is increased during the testing cycles, the corner plate will eventually puncture the film . High performance films will accept this puncture but the initial hole initiated in the film will not grow or propagate. As the film tension increases during subsequent test cycles, the hole will increase in size, eventually leading to our proscribed failure level (approximately 4″ tear) or actual breaking of the film web. This is the test we use to determine the maximum film tension any individual film can withstand at a given prestretch level and turntable speed. In turn, this allows us to predict the maximum load containment available from a given film. This is essential when obtaining accurate results while performing the ASTM D638 method since the thickness of the sample will change. Likewise, the machines offer customization options which include adding more security measures, as well as an option that allows for the process to be automated. Automated systems take care of measuring the sample, loading it, testing it and removing it.

Our cost effective machineries are perfect for completing any kind of challenging project. Our machineries are suitable for small scale, medium scale and large scale business organizations. Fall Dart Impact Testing Machine is used to test the impact resistance of various plastic films and slices, which meets the standards of ASTM D1709. HD-AA520 Pneumatic Single-Wing Drop Tester is suitable for testing the damage of product packaging when it is dropped, and assessing the strength of impact resistance during transportation and handling. The campaign aimed to collect more than 4,000 litres of plastic at the festival. Snack packets, plastic bags and bottle caps were collected and were be taken to Recycling Technologies, which recycles single-use plastics into a raw material used to make new plastic packaging products, the company says. These evaluations are employed when laboratory tests are not yet available or may not be able to predict recycling performance of a package component or innovation. In these cases, it may be desirable to test under regular production scale conditions.